Description

Thanks for continuous development, the COMPACT Series has turned into one of CEHISA’s best sellers.

The COMPACT Series, with a remarkable versatility and a compact size, has been designed to satisfy the most complex needs of carpenters, turning it into one of the best quality-price relationship edge banders of the market.

Feeding Station

Tray for the roll of edging material
Timer controlled automatic feeding allowing the precise adjustment of the infeed surplus and minimizing the waste of edging material
Pneumatic pre-cutting guillotine (up to 3mm PVC/ABS edges thickness)
Longer and reinforced infeed fence
Feeding tray with non-return tape system

Pre-Milling PF-2

(2) HF Motors
- The first 1.1kW, rotating CCW
- The second 0.75kW rotating CCW with pneumatic pressure control, providing optimum finish
New air blow nozzles for removing dust
Milling heads with welded DIA
- Standard tooling spec: ø60 ø20 H30 Z6

Glue Application Unit M2-NS

New design with improved thermodynamics, granting a shorter heating time with less power consumption (2.5kW). Full TEFLON coating of the whole assembly
Injection of melted glue at the upper and lower points of the application roller where heating elements are built in to maintain optimum working temperature
Automatic temperature control by electronic thermostat preventing the scorching of glue when the machine is idle. 1.5kg capacity glue tank
New glue regulating gate

Pressure Rollers

3 rollers exerting pressure on the edge band in order to achieve its adhesion onto the panel edge. The first roller is driven and the second one is of smaller diameter and idle
SIKO numerical counter for unit adjustment to 3mm edge/5mm strips

New End Trimming V-8

2 independent motors HF (0.55kW/12000 rpm) one performing the front and the other the rear trim cut
Smooth and precise movement of the carriage on two linear bearings along hardened and cylindrical base guideways

T8B Trimming Unit JC-3

2 separate units for the machining of excess of the edge along the upper and the lower edges of the panel
Two HF motors of 0.55kW/12000rpm with milling cutterheads with TC inserts
Roller type tracers for work with high gloss and 3D effect panels and edges
Tooling: milling cutters with TC changeable blades set ø65 x 20 x 22 Z4 R2

Control Panel 7”

Pivoting 7” TFT color touch screen
Intuitive modern interface
User friendly control with direct connection to the PLC, providing quick access to monitoring of all machine functions in real time (start/stop, program editing, parameters check & editing, alarms visualization, PLC I/O diagnostics)
Multi-language support and 128Mb memory to store screen data and work programs

Features

HF motors controlled by independent electronic inverters
Electrical parts, meeting the respective CE rules
Control panel with touchscreen display and integrated PLC
Dust collectors on all working stations
Pressure beam with closer wheels (less space between them)
Extension roller support for big size workpieces
Air blow nozzles for tracers cleaning
Cabin, housing all working units

Specifications

Edgebanding Material

Melamine/PVC/ABS/PP/veneer: 0.015”-0.118” (0.4-3mm)
Solid wood strips: up to 0.1968” (up to 5mm)

Panel

Thickness
- Min: 0.315” (8mm)
- Max: 2.36” (60mm)
Length
- Min: 4.724” (120mm)
- Max: unlimited
Width
- Min: 2.953” (75mm)
- Max: unlimited

Machine

Working speed: 472 in/min (12 m/min)
Pre-milling cutters height: 1.1811”/2.559” (30mm/65mm)
Working pressure: 6-7 kg/cm²
Total electrical output: 15.42 HP (11.5 kW)
Compressed Air Connection: 5 CFM @ 90 psi
Dust extraction: five x 4” @ 2200 CFM
Electrical Connection: 230V / Three Phase / 60 Hz
Dimensions: 170” x 25” x 58”
Weight: 2160 lbs

Optional Add-Ons

RB-5 Radius Scraper
- Designed to give the perfect finishing touch of the radius of the PVC/BC edging after T&B trimming
- Roller type horizontal and vertical travers with SIKO digital counters for precise easy adjustment and cleaning by air blow nozzles. Extraction system with PVC/ABS waste collector
- Blade holders for fast and easy change
- Manual positioning of the station in ON/OFF position
Glue Scrapper RR-8
- Designed to remove possible rests of glue on the top and bottom surfaces of the panel
- Two blade holders with independently adjustable vertical copying devices
- Air blow nozzles for tracer cleaning
- Manual positioning of the station in ON/OFF position
Buffing Unit PC-3
- Designed to remove possible residues of glue
- Restore the PVC/ABS edge color and polish it after trimming and scrapping operations
- 2 independent units with tilting motors (2 x 0.55kW/15000 RPM)
- Tooling: hard cotton discs ø100 mm
DUOMELT pack
- DUOMELT upgrade pack, allowing the use of the unit both with EVA and PUR adhesives. The optional pack includes a simple and efficient draining system for the residual glue in the glue pot and the necessary software to support this feature
Spare M-2NS glue unit
Spare M-2 DUOMELT glue unit
Button for ball joint adjustment
Service station for M2 glue units
Pneumatic cylinder on infeed fence for safer feeding and interval improvement
Automatic Positioning (2 pre-set pos, in pressure rollers and T&B trim)
Automatic Positioning (2 pre-set pos, in T&B trim and 2 in pressure rollers)
Automatic Positioning 2 pre-set pos, on Radius scraper RB-5 (2 blades)
Pneumatic setting of V-8
Pneumatic setting (ON/OFF) of RB-5
Pneumatic setting (ON/OFF) of RR-8
Motorized pressure beam
Panel width reduced to 75mm
Infrared Lamp
Hot air blower
Cleaning agent spray station at exit
Meter counter for edge consumption
Barcode Ready
220V Single Phase Version