Cantek EM12 End Matcher
Cantek EM12 End Matcher is documented as a model-specific catalog item from Cantek America. The exact CANEM12-460-3 configuration is mapped to Stellar Woodworks SKU CANEM12. Recorded technical data includes weight: 2,530.000 lbs. Use the specification table and linked product literature to confirm electrical, capacity, dimensional, and installation requirements for project planning.
Cantek America
2530 lbs
End Matchers
In stock / ready to order
6 in stock
Overview
Cantek EM12 End Matcher is documented as a model-specific catalog item from Cantek America. The exact CANEM12-460-3 configuration is mapped to Stellar Woodworks SKU CANEM12. Recorded technical data includes weight: 2,530.000 lbs. Use the specification table and linked product literature to confirm electrical, capacity, dimensional, and installation requirements for project planning.
Key Features
- Capable of processing end matching on flooring or paneling up to 12" wide x 1.38" thick.
- The Through-feed system allows the tongue and groove to be cut simultaneously on the tail of one board and the leading edge of the next board.
- Powerful dual 10HP cutterhead motors allow maximum cutting rate no matter the wood's width, thickness, or species.
- Stackable insert knife cutterheads allow for perfect matching of tongue and groove thickness.
- Variable cross-cutting feed speed and anti-tear-out blocks produce optimum finish quality on tongue and groove.
- Minimal floor space required with through feed design.
- A user-friendly PLC control touch screen can keep track of total linear feet cut as well as piece count.
- Production capacity of 77 lineal feet per minute based on an average of 6.5' board.
- Variable speed through-feed system is controlled by frequency inverter.
- Powered top urethane rolls and spring-loaded bed rollers feed the material into position for processing.
Technical Specifications
| Weight | 2,530.000 lbs |
|---|
| Brand | Cantek America |
|---|---|
| Weight | 2530 lbs |
| Category | End Matchers |
| Availability | In stock / ready to order |
No customer reviews have been submitted for this machine yet. Contact our equipment team for application references and current delivery information.
Estimated Handling & Transit
Both periods are estimates, not guaranteed delivery dates. Manufacturer lead time, special configuration, backorders, oversized transport, and customer changes can require more time.
Freight, Rigging & Installation
After you order, our team will contact you to arrange the carrier, destination access, delivery appointment, unloading or rigging needs, and any optional installation or training services before shipment. Standard freight does not automatically include unloading, final placement, crane or forklift service, rigging, installation, commissioning, operator training, or utility connections. Any additional charge not collected at checkout is disclosed for your written approval before shipment; we do not add an undisclosed charge.
Returns & Cancellations
Machinery orders may be subject to manufacturer production status, freight commitments, and authorized return conditions. Review the controlling policies; you do not need to contact us before placing the order.
Proof of Delivery & Installation
Real photos from real jobs. We do not drop machines at the curb — we coordinate delivery, installation, calibration, and operator handoff.
Interested in This Machine?
Our equipment team can answer questions, arrange a demonstration, or prepare a written quote defining product availability, freight, unloading, installation, training, and warranty scope.
Cantek EM12 End Matcher
Sale price:$33,060.00
Cantek EM12 End Matcher is documented as a model-specific catalog item from Cantek America. The exact CANEM12-460-3 configuration is mapped to Stellar Woodworks SKU CANEM12. Recorded technical data includes weight: 2,530.000 lbs. Use the specification table and linked product literature to confirm electrical, capacity, dimensional, and installation requirements for project planning.
6 in stock
Overview
Cantek EM12 End Matcher is documented as a model-specific catalog item from Cantek America. The exact CANEM12-460-3 configuration is mapped to Stellar Woodworks SKU CANEM12. Recorded technical data includes weight: 2,530.000 lbs. Use the specification table and linked product literature to confirm electrical, capacity, dimensional, and installation requirements for project planning.
Key Features
- Capable of processing end matching on flooring or paneling up to 12" wide x 1.38" thick.
- The Through-feed system allows the tongue and groove to be cut simultaneously on the tail of one board and the leading edge of the next board.
- Powerful dual 10HP cutterhead motors allow maximum cutting rate no matter the wood's width, thickness, or species.
- Stackable insert knife cutterheads allow for perfect matching of tongue and groove thickness.
- Variable cross-cutting feed speed and anti-tear-out blocks produce optimum finish quality on tongue and groove.
- Minimal floor space required with through feed design.
- A user-friendly PLC control touch screen can keep track of total linear feet cut as well as piece count.
- Production capacity of 77 lineal feet per minute based on an average of 6.5' board.
- Variable speed through-feed system is controlled by frequency inverter.
- Powered top urethane rolls and spring-loaded bed rollers feed the material into position for processing.
Technical Specifications
| Weight | 2,530.000 lbs |
|---|
| Weight | 2530 lbs |
|---|---|
| Brand | Cantek America |
Related products
Cantek 230 V Automatic Edgebander, 1 Phase
Cantek 230 V Automatic Edgebander, 1 Phase is documented as a Automatic Edgebander from Cantek America. The exact MX330 configuration is mapped to Stellar Woodworks SKU CANMX330. Recorded technical data includes phase: 1 and weight: 766.000 lbs. Use the specification table and linked product literature to confirm electrical, capacity, dimensional, and installation requirements for project planning.
Cantek D405ANC 10′ Programmable One Axis Sliding Table Saw Three Phase
Cantek D405ANC 10' Programmable One Axis Sliding Table Saw Three Phase is documented as a Sliding Table Saw from Cantek America. The exact CAND405ANC-230-3 configuration is mapped to Stellar Woodworks SKU CAND405ANC. Recorded technical data includes horsepower: 7.5HP, motor power: 7.5HP, and voltage: 230V. Use the specification table and linked product literature to confirm electrical, capacity, dimensional, and installation requirements for project planning.
Cantek GT635ARD8 25″ X 8″ Double Surface Planer
Cantek GT635ARD8 25" X 8" Double Surface Planer is documented as a Double Surface Planer from Cantek America. The exact CANGT635ARD-460-3 configuration is mapped to Stellar Woodworks SKU CANGT635ARD8. Recorded technical data includes horsepower: 5HP, phase: 3, and width: 45.1". Use the specification table and linked product literature to confirm electrical, capacity, dimensional, and installation requirements for project planning.
Cantek MX350 High Frequency Automatic Edgebander with Premilling, 1 Phase
Cantek MX350 High Frequency Automatic Edgebander with Premilling, 1 Phase is documented as a Automatic Edgebander from Cantek America. The exact MX350MR-1 configuration is mapped to Stellar Woodworks SKU CANMX350MR-1. Recorded technical data includes phase: 1 and weight: 1,400.000 lbs. Use the specification table and linked product literature to confirm electrical, capacity, dimensional, and installation requirements for project planning.
Cantek P20HV 20″ Single Surface Planer Three Phase
Cantek P20HV 20" Single Surface Planer Three Phase is documented as a Planer from Cantek America. The exact CANP20HV-230-3 configuration is mapped to Stellar Woodworks SKU CANP20HV3. Recorded technical data includes horsepower: 5HP, motor power: 5HP, and motor voltage: 230V. Use the specification table and linked product literature to confirm electrical, capacity, dimensional, and installation requirements for project planning.
Cantek P630HV 24″ Single Surface Planer 10HP Three Phase
Cantek P630HV 24" Single Surface Planer 10HP Three Phase is documented as a Planer from Cantek America. The exact CANP630HV-230-3 configuration is mapped to Stellar Woodworks SKU CANP630HV. Recorded technical data includes horsepower: 10HP, motor power: 10HP, and phase: 3. Use the specification table and linked product literature to confirm electrical, capacity, dimensional, and installation requirements for project planning.
Cantek PCS18D 18″ Pneumatic Chop Saw Dual Button LH Three Phase
Cantek PCS18D 18" Pneumatic Chop Saw Dual Button LH Three Phase is documented as a Cut-Off Saw from Cantek America. The exact CANPCS18LD-230-3 configuration is mapped to Stellar Woodworks SKU CANPCS18DLH. Recorded technical data includes horsepower: 10HP, motor power: 10 HP, and voltage: 230V. Use the specification table and linked product literature to confirm electrical, capacity, dimensional, and installation requirements for project planning.
Cantek PCS18RH 18″ Right Hand Pneumatic Cut-Off Saw
Cantek PCS18RH 18" Right Hand Pneumatic Cut-Off Saw is documented as a Cut-Off Saw from Cantek America. The exact CANPCS18R-230-3 configuration is mapped to Stellar Woodworks SKU CANPCS18RH. Recorded technical data includes horsepower: 10HP, motor power: 10 HP, and voltage: 230V. Use the specification table and linked product literature to confirm electrical, capacity, dimensional, and installation requirements for project planning.
Reviews
There are no reviews yet.